Chinese translation for "soldering time"

焊接时间

Related Translations:

dip soldering:  沉浸钎焊浸入焊接浸渍软钎焊软浸焊

soldering ladle:  焊勺焊锡杓

soldering bushing:  焊接轴衬

soldered tube:  锡焊管

soldering roll:  焊锡辊

solder perform:  预成型锡料

soldering point:  焊接点

wiping solder:  擦拭焊料钎焊焊料锡铅焊料

hard solder:  硬焊料硬焊条硬焊锡硬钎料

solder fusing:  焊料熔化

Example Sentences:

	1.	When soldering the electrolytic capacitor , the soldering time should never be permitted over 10 seconds , and for 260 ? c of the soldering temperature 在焊接电解电容器时，其焊接时间和焊接温度不应超过10秒钟及260摄氏度。
	2.	Based on the analysis and practice of the ultrasonic soldering process , the results show that it is important to procure high soldering quality on controlling submersion depth , the ultrasonic soldering time , assembling clearance and solder composition 根据对超声波钎焊工艺的分析和实践，结果表明控制产品在钎焊时的浸没深度与产品装配间隙、超声波钎焊时间和钎剂成分是获得高钎焊质量的重要条件。
	3.	Direct connect vias conduct so much heat away from the pin and into the plane that high temperature or long soldering time may be required to complete the joint - thermal damage could occur to both the board and the component from soldering or desoldering 在焊接时，直接连接的过孔会通过引脚把大量的热传导至内电层，因此完成焊接就需要很高的温度或者延长焊接时间，这就会导致在焊接或拆焊时发生电路板或元件的损坏。

Similar Words：

"soldering temperature" Chinese translation, "soldering term" Chinese translation, "soldering terminal" Chinese translation, "soldering theory" Chinese translation, "soldering thread of plastics" Chinese translation, "soldering tin" Chinese translation, "soldering tin bar" Chinese translation, "soldering tin wire" Chinese translation, "soldering tin; tin solder" Chinese translation, "soldering tongs" Chinese translation